| Technical Specification |
| VIDEO |
| Digital Video Inputs |
HDMI 2.0b |
| USB-C, DisplayPort alt mode 1.0, DisplayPort 1.4a |
| Digital Video Output |
Streaming video via RJ45, Dante AV-A or TNET Video Stream |
| Local HDMI 2.0 output |
| Max Resolution |
4096x2160P 4:4:4 |
| HDR |
HDR10/HLG/HDR10+/Dolby Vision support |
| HDCP Support |
HDCP 2.3/1.x |
| Color Space Support |
RGB, YCbCr |
| Deep Color Support |
1080p and under: 24, 30, 36 bpp |
| 2160p YUV444: 24 bpp |
| 2160p YUV422: 24/30/36 bpp |
| EDID |
Passthrough, Predefined or Custom EDID |
| Compression Standard |
AGIC3, Visually Lossless Compression |
| Encryption |
TNET Video Stream: AES256 |
| Dante AV-A |
| Bandwidth |
4K Peak: ~850Mbps |
| 4K Average: ~440 Mbps |
| 1080P Average: ~190Mbps |
| Latency Encode-Decode |
ULL Mode (Ultra Low Latency): |
| 2160p60Hz: 2ms |
| |
| Normal Mode: |
| 2160p60Hzs: 16ms |
| 2160p30Hz: 33ms |
| 1080p60Hz: 16ms |
| 720p60P: 16ms |
| 1080i30Hz: 33ms |
| |
| Scaling will not add additionally latency* |
| *Rotation CW 90 and 270 will introduce 1 extra frame latency. |
| Input Switching Time |
5s |
| AUDIO |
| Input Signal Types |
Embedded audio on HDMI or USB-C |
| Dante Audio |
| Analog Stereo (Balanced or Unbalanced) |
| Output Signal Types |
Analog Stereo (Balanced or Unbalanced) |
| Dante Audio and/or TNET Audio Stream |
| HDMI Embedded Audio Formats |
LPCM: Up to 7.1/24-bit/192kHz |
| Dolby: Dolby AtmosTM, Dolby TrueHD, Dolby Digital PlusTM, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0 |
| DTS: DTS-HD Master AudioTM, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1 |
| Analog Audio Format |
LPCM 2.0 |
| Dante Audio Format |
LPCM only |
| Dante Audio Sample Rate |
44.1, 48, 88.2, 96 kHz |
| ANALOG AUDIO PERFORMANCE |
| Frequency Response |
20Hz - 20kHz, ±0.5dB |
| S/N Ratio |
>90 dB 20 Hz -20 kHz (@0dB gain) A-weighted |
| THD +N |
< 0.01% @ 1 kHz |
| Stereo Separation |
> 90 dB |
| Volume |
- 80 to 0 dB |
| Delay |
0-170ms |
| USB |
| USB HOST |
USB 2.0 Type B port or USB-C Port |
| Support |
USB 2.0 |
| USB Virtual Hub |
1 level virtual USB 2.0 hub (maximum 7 USB Devices) |
| PORTS |
| Power |
1x 4-pin DC Power Connector |
| LAN1 PoE+/PoE++ |
8-wire RJ45 port |
| 10/100/1000 Mbps 10/100/1000Base-T auto-negotiation gigabit Ethernet switch port |
| VLAN tagging |
| LAN2 |
8-wire RJ45 port |
| 10/100/1000 Mbps 10/100/1000Base-T auto-negotiation gigabit Ethernet switch port |
| Supports PoE/PoE+ Pass-through if LAN1 is provided PoE++ |
| VLAN tagging |
| IR IN (front panel) |
3-pin terminal Phoenix connector. |
| Provides Infrared (IR) input only and passes signal back to connected decoder (33-60 kHz; typically, 39 kHz) |
| IR OUT |
2-pin terminal Phoenix connector |
| Provides Infrared (IR) output only (33-60 kHz; typically, 39 kHz). |
| RS232 |
3-pin terminal Phoenix connector. |
| Full duplex communication. |
| Baud Rate: 2400, 4800, 9600(default), 19200, 38400, 57600, 115200 |
| AUDIO |
5-pin terminal Phoenix connector which provides user- selectable balanced/unbalanced input or output |
| HDMI OUT |
HDMI video output |
| (Loop-out from HDMI IN or USB-C IN) |
| HDMI IN |
HDMI video input |
| USB-C IN |
USB-C Video and USB Host, locking |
| USB HOST |
USB 2.0 Type B Host port to be combined with HDMI |
| Power |
| Optional Power Supply |
DC24V 6.5A power adapter or PoE++/PoE+ |
| PoE |
PoE+ (802.3at), PoE++ (802.3at) for PoE/PoE+ passthrough |
| PoE Pass-through (LAN2) |
PoE (802.3af), PoE+ (802.3at). |
| LAN1 require PoE++ (802.3at) |
| Max power consumption |
16.9W(Max) |
| (no USB-C PD) |
| Max power consumption |
6.4W |
| (USB-C PD) |
| ENVIRONMENTAL |
| Operating Temperature |
-5°C ~ +55°C |
| Storage Temperature |
-20°C ~ +70°C |
| Humidity |
10 - 90% RH (non-condensing) |
| Heat Dissipation |
26.5 BTU/hr (Typical) |
| 48.7 BTU/hr (Max) |
| Cooling |
Fan (User Configurable) |
| Auto, OFF, Ultra Low, Low, Medium, High, Super high |
| Noise Level at 1m |
Fan Settings |
| • AUTO |
| • OFF: 3.7 dB |
| • Ultra Low (2700 RPM): 9.8 dB |
| • Low (3900 RPM): 16.2 dB |
| • Medium (5000 RPM): 22.4 dB |
| • High (6000 RPM): 27.3 dB |
| • Super High (6300 RPM): 29.0 dB |
| GENERAL |
| Product Dimensions |
196 x 165 x 25 mm |
| Product Weight |
805g |
| Shipping Weight |
1050g |
| SUBSTREAM MJPEG |
| Resolution Support |
1280x720, 960x540, 640x360 |
| Frame Rate |
15, 20, 25, 30 |
| Bitrate Range |
Default/target consumed network bandwidth is < 8Mbps |
| Streaming Protocols |
Motion-JPEG format (MJPEG) |
| PROTCOLS |
| Video Streaming |
RTSP Multicast, RTSP Unicast, IGMPV2 or IGMPV3 |
| Audio Streaming |
AES67, Dante |
| Addressing |
DHCP or Static IP |
| Encryption |
AES256 |
| Discovery |
Broadcast, mDNS, Node Query |
| Authentication |
IEEE 802.1x |
| Other Supported Protocols |
SNMP, MQTT, LLDP, LDAP, HTTPS, SSH, SSL/TLS |
| INDICATORS AND CONTROL |
| POWER |
Illuminates red when power off, |
| illuminates blue when power on. |
| SIGNAL |
Illuminates green when there is a valid video signal; Illuminates yellow when streaming with no source image (No valid signal). |
| HDMI |
Illuminates green when the corresponding source is selected. |
| USB-C |
Illuminates green when the corresponding source is selected. |
| SELECT |
Press and hold 3s to toggle between manual and auto switching modes. |
| Short press to switch input source: USB-C/HDMI |
| ID-Button |
Multi-purpose button, refer to manual |
| RESET |
Factory reset |
| Control |
WEB UI, Open API via Ethernet or RS-232, Dante Controller, DDM, Dante Director, Front panel |
